CONTACT US

If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!




ASTM A135/A135M


This specification covers two grades of electric resistance-welded steel pipe in NPS 2 to NPS 30 [DN 50 to DN 750] inclusive, with nominal (average) wall thickness up to 0.500 in. [12.70 mm], inclusive, and in nominal sizes NPS 3⁄4 to NPS 5 [DN 20 to DN 125] inclusive with nominal (average) wall thickness 0.083 in. [2.11 mm] to 0.134 in. [3.40 mm], depending on size. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification. The pipe is intended for conveying gas, vapor, water or other liquid; only Grade A is adapted for flanging and bending (Note 2). The suitability of pipe for various purposes is somewhat dependent upon its dimensions, properties, and conditions of service, so that the purpose for which the pipe is intended should be stated in the order. The pipe may be furnished either non expanded or cold expanded at the option of the manufacturer. When pipe is cold expanded, the amount of expansion shall not exceed 1.5 % of the outside diameter pipe size.

Grades

Description

Grade A

-

Grade B

-

Chemical Properties

Element

Grade A

Grade B

Carbon

0.25

0.30

Manganese

0.95

1.20

Phosphorus

0.035

0.035

Sulfur

0.035

0.035

Note: [A] The total composition for these five elements shall not exceed 1.00 %.

Mechanical Properties

rades

Tensile strength, min, psi [MPa]

Yield strength, min, psi [MPa]

Elongation in 2 in. or 50 mm

For pipe having a specified wall thickness of 5⁄16 in. [7.9 mm] or more

For pipe having a specified wall thickness of less than 5⁄16 in. [7.9 mm]

For pipe of any size

Grade A

48 [330]

30 [205]

35

A

35

Grade B

60 [415]

35 [240]

30

B

30

ONLINE MESSAGE